PZ2800

Features

  • Rear panel gain controls for tamper resistant operation with gain controls bypass option internally selectable
  • Male 3 - pin Phoenix inputs
  • Independent clip limiters for reduced distortion
  • Internally selectable high pass filter protect speakers and prevent speaker transformer saturation with minimal effect on program material
  • Class G complementary bipolar output circuitry reduces AC power draw and waste heat by 40%
  • Front panel indicators include signal presence, clip & protect
  • Modular construction for convenient serviceability
  • Stereo and bridge mono mode
  • Forced front to back air cooling
  • Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
  • 4 way binding post speaker connectors

Output Power ( per channel) 810 watts @4W, 520 watts @8W (both channels driven at 1KHz, < 0.1% THD)
1400 watts@ 8W, bridged mono; 1800 watts @4W, bridged mono
Continous Power 750 watts @ 4W; 500 watts @8W (both channels driven at 20Hz – 20KHz, 0.1% THD)
Frequency Response 20 Hz – 20 KHz, ± 0.2 dB
8 Hz – 100 KHz, ± 3.0 dB
Total harmonic Distortion 0.01%, 1 KHz, 8; 0.01%, 20 Hz, 8; 0.05%, 20Hz-20KHz, 8 (at rated power)
Inter Modulation Distortion <0.01% SMPTE, <0.01% IHF (at rated power, 8)
Output Hum & Noise -105 dB from full output (20 Hz - 20 KHz unweighted)
Damping factor > 200 into 8 ohms <1KHz
Crosstalk -90 dB (20 Hz – 1 KHz)
Full Power Sensitivity 1.3 V RMS
Bandwith 100 KHz
Slew Rate 50 V/µs
Rise Time 2µs 10% - 90%
Voltage Gain 34 dB
Input Impedance 20KΩ, balanced
Amplifier Protection Fuseless short-circuit protection, ultrasonic and RF protection, thermal protection
Load Protection Turn-on delay, DC fault protection, ultrasonic limiting
Cooling Forced air front to rear
Power 230 - 240 VAC, 50-60 Hz
Product Dimensions 133 mm x 483 mm x 457 mm (5.3" x 19" x 18")
Net weight 21 kg (46 lb)
Packed Weight 24 kg (53 lb)
Tags: CineLine , Amplifiers , UL , PZ2800