AD21300
Features
- High efficiency DPT Technology
- Premium heavy duty Toroidal Transformer
- Highly sensitive CMRR balanced input stage
Pulz AD21300 is a two channel power amplifier designed and built for applications where sonic transparency and robust high power output capability are the prime criteria. Built around an oversized classic toroidal power supply and ultra – linear
The Class TD output stage of the Pulz AD21300 packs 3500 Watts of continuously deliverable clean audio in a 2U chassis. The Pulz AD21300 remains relatively cool even when driving the most demanding low impedance subwoofer loads. All the components used in the Pulz AD21300 are of the highest standard and from the most reputed manufacturers.
| No. of Channels | 2 |
| Output Power (per channel) | 2 x 400 Watts @ 16Ω 2 x 800 Watts @ 8Ω 2 x 1300 Watts @ 4Ω 1 x 2500 Watts @ 8Ω bridge mode 1 x 3500 Watts @ 4Ω bridge mode |
| Frequency Response | 20Hz – 20kHz, +0/-0.5dB |
| Total Harmonic Distortion + Noise | <0.1% |
| Signal to Noise Ratio | 110dB |
| Damping factor | >300 |
| Crosstalk | <-60dB |
| Slew Rate | >10V/us |
| Input Sensitivity | 1.4V |
| Input Impedance | 20kΩ, balanced |
| Voltage Gain | 34dB |
| Cooling | Air flow from front to rear |
| Protection | Fuseless short circuit protection, ultrasonic and RF protection, thermal protection |
| Load Protection | Turn on delay, DC fault protection, Ultrasonic limiting |
| Power requirement | 220V AC 50Hz, ±10% |
| Inputs | Balanced inputs XLR-F |
| Outputs | NL4 Speakon |
| Front panel | Power switch, Level control, Power indicator, Signal indicator, Clip, Protection |
| Rear panel | Stereo/Bridge switches, Sensitivity selection switch, VCL selection switch |
| Power requirement | 230 – 240V AC, 50Hz – 60Hz |
| Power consumption | 2300W |
| Product Dimensions | 88 mm x 490 mm x 490 mm (3.4″ x 19.3″ x 19.3″) |
| Net Weight | 32 kg (70 lb) |
| Packed Weight | 35 kg (77 lb) |
